Series 118 - Digital Gear Tooth Micrometers
Digital Gear Tooth Micrometers
Series 118
FEATURES
Series 118
FEATURES
-
Resolution:
Digital reading: .00005'' / 0.001mm
Scale reading: .0001'' / 0.01mm - Ratchet stop
- Measures over-pin diameter of gears with precision steel (carbide) ball-tipped measuring faces
- Interchangeable ball anvil-spindle tips for various gear modules (0.6-3.5) are optional
- Set includes 10 pairs interchangeable anvils
- Inch/Metric conversion
- Upon switching on the display will read the actual absolute measuring position
- Automatic On/Off to maximize battery life
- Absolute or incremental measuring modes
- Protection level IP65
- S-wrench, Battery, Anvils 10 pairs (set), Standard (over 1'' / 25mm range)
- Warranty card, Instruction manual, Calibration certificate
| Sets | ||
| Range | Accuracy | Code No. |
| 0-25mm / 0-1'' | ± 0.002mm | 118-31-8 |
| 25-50mm / 1-2'' | ± 0.002mm | 118-32-8 |
| 50-75mm / 2-3'' | ± 0.003mm | 118-33-8 |
| 75-100mm / 3-4'' | ± 0.003mm | 118-34-8 |
| 100-125mm / 4-5'' | ± 0.003mm | 118-35-8 |
| 125-150mm / 5-6'' | ± 0.003mm | 118-36-8 |
| 150-175mm / 6-7'' | ± 0.004mm | 118-37-8 |
| Individual | ||
| Range | Accuracy | Code No. |
| 0-25mm / 0-1'' | ± 0.002mm | 118-31-0 |
| 25-50mm / 1-2'' | ± 0.002mm | 118-32-0 |
| 50-75mm / 2-3'' | ± 0.003mm | 118-33-0 |
| 75-100mm / 3-4'' | ± 0.003mm | 118-34-0 |
| 100-125mm / 4-5'' | ± 0.003mm | 118-35-0 |
| 125-150mm / 5-6'' | ± 0.003mm | 118-36-0 |
| 150-175mm / 6-7'' | ± 0.004mm | 118-37-0 |
