Series 126 - Digital Point Micrometers
Digital Point Micrometers
Series 126
FEATURES
STANDARD ACCESSORIES
Series 126
FEATURES
-
Resolution:
Digital reading: .00005'' / 0.001mm
Scale on digital models: .0001'' / 0.01mm - 15 degree and 30 degree measuring points are avaiable
- For measuring the web thickness of drills, small groove, and other hard to reach dimensions
- Carbide tipped measuring faces
- Ratchet stop
- Inch/Metric conversion
- Upon switching on the display will read the actual absolute measuring position
- Automatic On/Off to maximize battery life
- Absolute or incremental measuring modes
- Protection level IP65
STANDARD ACCESSORIES
- S-wrench, Battery, Standard (over 1'' / 25mm range)
- Warranty card, Instruction manual, Calibration certificate
| Digital Models | |||
| Range | Accuracy | Anvil Type | Code No. |
| 0-25mm/0-1'' | ± 0.002mm | 15º | 126-01-0 |
| 25-50mm/1-2'' | ± 0.002mm | 15º | 126-02-0 |
| 50-75mm/2-3'' | ± 0.003mm | 15º | 126-03-0 |
| 75-100mm/3-4'' | ± 0.003mm | 15º | 126-04-0 |
| 0-25mm/0-1'' | ± 0.002mm | 30º | 126-01-2 |
| 25-50mm/1-2'' | ± 0.002mm | 30º | 126-02-2 |
| 50-75mm/2-3'' | ± 0.003mm | 30º | 126-03-2 |
| 75-100mm/3-4'' | ± 0.003mm | 30º | 126-04-2 |
