Series 311 - Long Jaw Vernier Calipers (Mono block)
Long Jaw Vernier Calipers (Mono block)
Series 311
FEATURES
Mono Block
Series 311
FEATURES
Mono Block
-
Graduation£º
Inch: .001''
Metric: 0.02mm or 0.05mm - Stainless steel
- Models available with an assortment of Metric/Inch scale configurations
- Designed with fine adjustment to allow precise movement of the slider
- Internal measurement jaws are rounded to provide accurate measurement of internal diameters
-
Minimum internal diameter measurement capability of:
10mm for 300mm/12'' range
20mm for over 300mm/12'' range
- Warranty card, Calibration certificate, Instruction manual
| Mechanical Models | ||||
|
Range (Lower/Upper) |
Graduation (Lower/Upper) |
Accuracy | Jaw Length | Code No. |
| 0-300mm / 0-12'' | 0.02mm / .001'' | ± 0.04mm | 90mm | 311-12-4 |
| 0-500mm / 0-20'' | 0.02mm / .001'' | ± 0.05mm | 200mm | 311-20-4 |
| 0-750mm / 0-30'' | 0.02mm / .001'' | ± 0.07mm | 200mm | 311-30-4 |
| 0-1000mm / 0-40'' | 0.02mm / .001'' | ± 0.07mm | 200mm | 311-40-4 |
| 0-300mm / 0-12'' | 0.05mm / 1/128'' | ± 0.05mm | 90mm | 311-12-6 |
| 0-500mm / 0-20'' | 0.05mm / 1/128'' | ± 0.08mm | 200mm | 311-20-6 |
| 0-750mm / 0-30'' | 0.05mm / 1/128'' | ± 0.10mm | 200mm | 311-30-6 |
| 0-1000mm / 0-40'' | 0.05mm / 1/128'' | ± 0.10mm | 200mm | 311-40-6 |
